Knife Gate Valve
( GATE / GLOBE / LIFT, SWING CHECK)
Knife Gate Valve is designed for isolation, and on-off applications in corrosive, abrasive liquid applications in Pulp & Paper, Mining, Waste Water, Chemical, Petrochemical, Power, and Steel. Our knife Gate valves are available as a bi-directional resilient seated gate valve or a unidirectional metal seated valve. A broad body and trim materials are selected and fabricated to suit various service conditions.
- Body Material: Stainless Steel, Carbon Steel, Ductile Iron, etc.
- OS & Y, Rising Stem, or Non-Rising Stem
- Controllable Valve Position Allowing Lockup.
- Energy Conservation, 80% Hydraulic Transmission Efficiency.
- Coating: Standard Paint Coating or Original Color
- Size Range: NPS 2” ~ 48” ; DN50 ~ DN1200
- Pressure Rating: Class 125 & Class 150 ; PN6, PN10, PN16
- End Type: Wafer, Lugged, Flanged, etc.
- Mode of Operation: Handwheel, Bevel Gear, Electric, Pneumatic, etc.
- Design and Manufacture: MSS SP-81 or DIN 3352
- Pressure-Temperature Rating: ASME B16.34
- Face to Face Dimensions: ASME B16.10 or DIN 3202 F1
- Flange Ends Dimensions: ASME B16.5 or DIN 2531 – 2532, DIN 2543 – 2544, EN1092
- Inspection & Test: API 598 or DIN 3230
- Seat: NBR, EPDM, Viton, PTFE or Metal to Metal
Knife Gate Valve
( GATE / GLOBE / LIFT, SWING CHECK)
- Body Material: Stainless Steel, Carbon Steel, Ductile Iron, etc.
- OS & Y, Rising Stem, or Non-Rising Stem
- Controllable Valve Position Allowing Lockup.
- Energy Conservation, 80% Hydraulic Transmission Efficiency.
- Coating: Standard Paint Coating or Original Color
- Size Range: NPS 2” ~ 48” ; DN50 ~ DN1200
- Pressure Rating: Class 125 & Class 150 ; PN6, PN10, PN16
- End Type: Wafer, Lugged, Flanged, etc.
- Mode of Operation: Handwheel, Bevel Gear, Electric, Pneumatic, etc.
- Design and Manufacture: MSS SP-81 or DIN 3352
- Pressure-Temperature Rating: ASME B16.34
- Face to Face Dimensions: ASME B16.10 or DIN 3202 F1
- Flange Ends Dimensions: ASME B16.5 or DIN 2531 – 2532, DIN 2543 – 2544, EN1092
- Inspection & Test: API 598 or DIN 3230
- Seat: NBR, EPDM, Viton, PTFE or Metal to Metal
